Rich Fercy | Wear Plate Expert | About Us | Wisconsin

Wear Answers

About WearAnswers.com and Rich Fercy

Hi, I'm Rich Fercy. My hands on experience with wear resistant steel and welding solutions since 1993, will assist in getting you longer equipment life and greater profitability.

As a frequent guest welding instructor at Fox Valley Technical College in Appleton, WI; I deliver technical information and application expertise in everyday language; insuring the information is not only understood, but easily retained as well.

A call to 920-858-3252 or CLICK HERE TO EMAIL ME will help you get your wear resistant steel challenges under control.

Customer Results

Admin Login

Login

Close

Wear Answers

"The AR400 wear bars on the back of our 400 Kobelco excavator bucket would need repairs after 600-800 hours. We replaced them with TriBraze® wear strips which have passed 1500 hours, with some life left".

The cast liner section in our rotary drum would last 12 - 18 months. We replaced them with formed TriBlaze® liners, and they show little wear after two years."

"We started using your products in a high wear cove area. We were getting approximately 4 weeks out of our existing AR-400 wear plate. We installed a piece of TriBraze® and are now running 24 weeks before replacement with the same production levels."

"Simpson mixer blades made of AR plate with carbide inserts were only lasting 4 weeks. We replaced them with TriBraze® and they now last 5 months."

"The sand chutes lined with AR400 on our wash plant would last one season. I replaced it with Super-C clad plate and it finished the 3rd season with a few more remaining."

About WearAnswers.com and Rich Fercy

Customer Results

Admin Login

Industries