Media Room | Wisconsin

"We started using your products in a high wear cove area. We were getting approximately 4 weeks out of our existing AR-400 wear plate. We installed a piece of TriBraze® and are now running 24 weeks before replacement with the same production levels."

Maintenance Supervisor, Kohler® Co., Kohler WI

The cast liner section in our rotary drum would last 12 - 18 months. We replaced them with formed TriBlaze® liners, and they show little wear after two years."

Ass't Engineering Manager, ThyssenKrupp Waupaca Foundry, Marinette WI

"The AR400 wear bars on the back of our 400 Kobelco excavator bucket would need repairs after 600-800 hours. We replaced them with TriBraze® wear strips which have passed 1500 hours, with some life left".

Aggregate Supervisor, County Materials Corporation, Marathon WI.

"Simpson mixer blades made of AR plate with carbide inserts were only lasting 4 weeks. We replaced them with TriBraze® and they now last 5 months."

Maintenance Supervisor, Kohler Co., Kohler WI

"The sand chutes lined with AR400 on our wash plant would last one season. I replaced it with Super-C clad plate and it finished the 3rd season with a few more remaining."

Aggregate Supervisor, County Materials Corporation, Marathon WI

The August 2009 issue of Recycling Today Magazine featured an article written by Rich Fercy titled, "Wearing On".

This article describes the issues involved with selecting manganese or alloy steel replacement components for auto shredders in the recycling industry.

See the article.

Customer Results

Audio Testimonials

Industries

Aggregate/Sand & Gravel
Pulp and Paper
Foundry
Recycling
Mining
Power Generation
Asphalt
Cement Block & Concrete
Fabrication Shops
Machine Shops