Pulp Mill | Deflector Plates | Conveyors | Wisconsin

Wear Answers

Pulp Mill

Blow Tank
Blow Nozzles-Various sizes
Blow Tank Target Plate Deflection Angle
Removable Impact Liner for Blow Tank
Top Section
Transition to Base Blow Tank
Wear Plate for Roof of Blow Tank

Chutes
Discharge Chute on Bucket Elevator
Feed Chute for Rotary Cooler

Deflector Plates
Blow Line
Hydrapulper Deflector Plates
Shroud and Deflector Plates

Screens
Knife Ring for Refibrilizer Screen
Refibrilizer Screen

Screw Conveyors
Repulper Screw
Screw for Thick Stock Pump Conveyor
Bark Washer Screw
Vortex Screw for Digester Inline Drainer

Chip Silos
Complete Turntables
Tapered Trunnion Wheels
Turntable Top Plates

Wear Answers

"Simpson mixer blades made of AR plate with carbide inserts were only lasting 4 weeks. We replaced them with TriBraze and they now last 5 months."

"We started using your products in a high wear cove area. We were getting approximately 4 weeks out of our existing AR-400 wear plate. We installed a piece of TriBraze and are now running 24 weeks before replacement with the same production levels."

"The sand chutes lined with AR400 on our wash plant would last one season. I replaced it with Super-C clad plate and it finished the 3rd season with a few more remaining."

The cast liner section in our rotary drum would last 12 - 18 months. We replaced them with formed TriBraze liners, and they show little wear after two years."

"The AR400 wear bars on the back of our 400 Kobelco excavator bucket would need repairs after 600-800 hours. We replaced them with TriBraze wear strips which have passed 1500 hours, with some life left".

Customer Results

Industries