Recycling Today Report Download | Wisconsin

Wear Answers

Click on each "Report" below to download them immediately.

Report 1 - "How to Avoid 6 Common Recycling Industry Wear Plate Mistakes"

Report 2 - "Welding Manganese Steels for Maximum Effectiveness"

After you download the reports, you can:

Click Here to go to the "Wear Plate Solutions" page for detailed information on the different wear resisitant steels available,

Or,

Go to the www.WearAnswers.com home page to see additional industries I serve. From here check out the results my customers have achieved using these materials.

Thank you again for requesting these reports. They were designed for your benefit.

Wear Answers

"Simpson mixer blades made of AR plate with carbide inserts were only lasting 4 weeks. We replaced them with TriBraze and they now last 5 months."

"The sand chutes lined with AR400 on our wash plant would last one season. I replaced it with Super-C clad plate and it finished the 3rd season with a few more remaining."

The cast liner section in our rotary drum would last 12 - 18 months. We replaced them with formed TriBraze liners, and they show little wear after two years."

"We started using your products in a high wear cove area. We were getting approximately 4 weeks out of our existing AR-400 wear plate. We installed a piece of TriBraze and are now running 24 weeks before replacement with the same production levels."

"The AR400 wear bars on the back of our 400 Kobelco excavator bucket would need repairs after 600-800 hours. We replaced them with TriBraze wear strips which have passed 1500 hours, with some life left".

Customer Results

Industries